The connector can connect two objects or parts together. As a middle bridge, there are tips and methods for installing the connector! Let Suzhou Santian Precision Mould Co., Ltd. tell you how to choose the connector and how to install it to save the most time and effort.
Solder connector
Welded connectors are specific connectors that have a soldering function, and are also compared to solder groove or cup types. This connector has a cylindrical cavity on the back of each contact, where the wires are shorted. Each solder bath will be filled with solder in advance, and then inserted into the wire, you can solder the two, it is a quick installation connector.
Crimp terminal
The crimping method is a common installation method of the connector. It is to put a wire into the contact, and then put the contact into a special tool to complete the crimping. The crimping operation is simple and easy to get started, but requires crimping tools to operate. If only a small amount of connector installation is required, this is not a reasonable installation method. Because the crimping tool is relatively expensive, it is suitable for people who are specialized in connector installation or who need to install a large number of connectors.
Insulation stripping contacts
The insulation stripping contact is also called IDC. IDC is called “the most intelligent connector installation method”, there is no need to prepare the wire separately, only need to clamp the wire between the two prongs, the prong can pierce the insulation layer of the wire to complete the connection.
The above are three common connector installation tips! Order connectors, custom connectors, wholesale connectors, choose Suzhou Santian Precision Mould Co., Ltd.
Kenny's Interesting Town 